X

Research Publication

Research Publications

  1. Gulshan Chauhan, “Exploring Capacity Utilization Improvement: A Case Study”. International Journal of Contemporary Practices, Vol. 1, Issue 3, 2012. (Number of citations 00)
  2. Chauhan, G., & Singh, T. P. “Lean manufacturing through management of labor and machine flexibility: A comprehensive review”. Global Journal of Flexible Systems Management, Vol 12, Issue 1 and 2, pp 69-90, 2011 (Number of Citations: 05)
  3. Sharma, P., Chauhan, G., & Sharma, N. “Production of AMC by stir casting–An Overview”. International Journal of Contemporary Practices (ISSN: 2231-5608), Vol 2, Issue 1, pp 23-46, 2013 (Number of citations: 12)
  4. Sharma, P., Chauhan, G., & Sharma, N. “Friction Stir Welding of Aluminum Matrix Composite-An Overview”, International Journal of Contemporary Practices ; Vol 2, Issue 2, pp 20-37, March 2013 (Number of citations 00)
  5. Chauhan, G., & Singh, T. P. “Resource flexibility for lean manufacturing: SAP-LAP analysis of a case study”. International Journal of Lean Six Sigma, Vol 4 Issue (4), pp 370-388. (Number of Citations 02)
  6. Chahal, V., Sharma, S., Chauhan, G. “Advance industrial approach for waste reduction (Lean Manufacturing).” International Journal of Emerging Technology and Advanced Engineering, Vol. 3, issue 11, November 2013. (Number of Citations 00)
  7. Satish Kumar Sharma, Sunil Dhull, Ajay Singh, Gyanender Ghangas, “Supplier Management: A Contemporary Need”, International Journal of Contemporary Practices (ISSN: 2231-5608), Vol. 1, Issue. 12, 2012, pp 39-49. (Number of Citations 00)
  8. Sharma, S. K., & Dhull, S. “Lean and Relationship Management” International Journal of Research in Engineering & Applied Sciences (ISSN: 2249-3905), Volume 2, Issue 2, pp 1423-1430, February 2012. (Number of Citations 00)
  9. Sunil Dhull, “Productivity Management :Case Studies in Management”, 2011
  10. Dhull, S., & Narwal, M. “Drivers and barriers in green supply chain management adaptation: A state-of-art review”, Uncertain Supply Chain Management (ISSN 2291-6830), Vol 4 Issue 1, pp 61-76, 2016. (Number of citations 00)
  11. Pardeep Sharma, “Prevention of Casting from Casting Defects by Using DMAIC Approach”, International Journal of Contemporary Practices, Vol. 1, Issue 8, 2012. (Number of citations 00)
  12. Pardeep Sharma, “Review of CIM System”, International Journal of Contemporary Practices, Vol. 1, Issue 7, 2012. (Number of citations 00)
  13. Pardeep Sharma, “Overview of FMS and Automation”, International Journal of Contemporary Practices Vol. 1, Issue 6, 2012. (Number of citations 00)
  14. Pardeep Sharma, “Microstructural Behavior of AA6061/12.5% Sic MMC by Stir Casting”, International Conference on Advance Computing and Communication Technologies, November 2013. (Number of citations 00)
  15. Gyanender Ghangas,”Optimization Techniques for Surface Roughness of CNC Milling: A Review”, International Journal of Electrical, Electronics and Mechanical Fundamentals, Vol. 8, Issue 1, 2014. (Number of Citations 00).
  16. Naveen Kumar, Sunil Kadiyan, Amit Goyal, “Heat Enhance by Plate Fin Heat Exchanger with Triangular fins using FLUENTS as the CFD tool and Gambit as the Preprocessor”, International Journal of Research in Mechanical Engineering and Technology (ISSN 2249 – 5762), Vol. 3,  Issue 2, pp 179-183, Mar-Oct 2013,. (No of citations 00)
  17. Bhool, R., & Narwal, M. S. “An analysis of drivers affecting the implementation of green supply chain management for the Indian manufacturing industries”. International Journal of Research in Engineering and Technology, Vol 2 Issue 11, pp 2319-1163, 2013. (No of citations 06)
  18. Bhool, R., Kumar, P., Kumar, P., & Mehla, A. “Performance Evaluation and Regeneration of Activated Charcoal by Solar Parabolic Dish Collector”, International Journal of Science, Engineering and Technology Research, Volume 3, Issue 5, pp 1507-1514, May 2014. (No of citations 00)
  19. Mehla, A., Kumar, P., Bhool, R., & Kumar, P. “Regeneration of Soild Desiccant by Solar Parabolic Dish Collector in India: An Experimental Analysis”, International Journal of Research in Engineering and Technology (ISSN 2319-1163), Vol.03, Issue 05, pp 0723-0734 2014, April & May-2014. (No of citations 00)
  20. Kapoor, N., Upneja, V., Bhool, R., & Katyal, P. “Design and Stress Strain Analysis of Composite Differential Gear Box”. International Journal of Science, Engineering and Technology Research, Volume 3, Issue 7, pp 1881-1895, July 2014. (No of citations 00)
  21. Kapoor, N., Kumar, P., Garg, R., & Bhool, R. “Parametric Modeling and Weight Analysis of Glass Filled Polyamide Composite Differential Gearbox”, International Journal of Science, Engineering and Technology Research, Volume 3, Issue 6, pp 1705-1711, June 2014 (No of citations 01).
  22. Kumar, A., Kumar, P., Kumar, A., & Singh, B. “Performance Evaluation of Tin Coated Carbide Insert for Optimum Surface Roughness in turning of AISI 1045 Steel”, International Journal of Research in Engineering and Technology (ISSN: 2319-1163) Vol. 2, Issue 11, pp 157-162, November 2013. (No of citations 01).
  23. Anand Kumar, Pardeep Sharma, Suresh Kataria, Anuj Kumar,”Comparison of Machining parameters for Optimum Surface Roughness of AlSI 1045 with Tin and TiAlN Coated Carbide Tools”, International Journal of Research in Mechanical Engineering & Technology, Vol. 3, Issue 2, pp 253-258, May – Oct 2013. (No of citations 00)
  24. Suresh Kataria, Manish Bajaj, Sunil Kadiyan, Anand Kumar, “Experimental Investigation on WEDM Machine Using Taguchi Techniques for Optimization of Process Parameter” International Journal of Research in Mechanical Engineering & Technology (ISSN : 2249-5762), Vol. 3, Issue 2, May – Oct 2013. (No of citations 00)
  25. Sunil Kadiyan, Dr. R K Garg, Ajay Kumar, ”Availability analysis of a E. B. I. system in a process industry by using Markov Death Birth Rule.”, International Journal of Research in Mechanical Engineering & Technology, Vol. 3, Issue 1, pp 22-25, Nov – April 2013. (No of citations 00)
  26. Vikram Singh, Suresh Kataria, Sunil Kadiyan, Anup Lega, Seeone Sharma,” Experimental Investigation of Surface Integrity of Cobalt Bonded Tungsten Carbide (Wc-Co) Using EDM Process Material”, International Journal of Research in Mechanical Engineering & Technology, Vol. 3, Issue 2, May-Oct 2013 (No of citations 00)
  27. Kumar, D., Mittal, K., Kataria, S., Kadiyan, S., & Sharma, S. “Experimental Investigation on Surface Modification of WC-Co by Electric Discharge Coating Process Using SiC/Cu Green Compact Tool-electrode”, International Journal of Research in Mechanical Engineering & Technology, Vol 3 Issue 2, pp 274-278, May – Oct 2013. (No of citations 02)
  28. Niranjan Pawaria, Suresh Kataria, Amit Goyal, Seeone Sharma, ” Effect of Heat Input and Shielding Gas on Hardness, Tensile and Impact Strength of 2.25 Cr-1Mo Steel Weld Metals in GMAW”, International Journal of Research in Mechanical Engineering & Technology (ISSN : 2249-5762), Vol. 3, Issue 2, pp 266-269, May – Oct 2013 (No of citations 00)
  29. Amit Goyal, Pankaj Sharma, Niranjan Pawaria”, Effect of Tool Shape on Mechanical Properties in Single and Double Sided Friction Stir Welding on AA 3003 Aluminum Alloy”, International Journal of Research in Mechanical Engineering & Technology (ISSN : 2249-5762), Vol. 4, Issue 1, pp 48-52, Nov 2013 – April 2014. (No of citations 00)
  30. Rahul Garg, Anuj Kumar, Nitin Kapoor, “An Experimental Thermal Performance Analysis & Comparison of a Direct Expansion Solar Assisted Heat Pump Water Heater With Unglazed and Single Glazed Collector”, International Journal of Research in Mechanical Engineering & Technology (ISSN : 2249-5762), Vol. 4, Issue 2, pp 7-10, May – October 2014. (No of citations 00)
  31. Shekhar Sharsar, Ram Bhagat, Nitin Kapoor, “Evaluation of Erosion Wear of HVOF Sprayed Al-Si Polyester Abradable Coating by Taguchi Method”, International Journal of Research in Mechanical Engineering & Technology, Vol. 4, Issue 2, pp 28-31, May – October 2014. (No of citations 00)
  32. Pardeep Kumar, Mukesh Kumar, “Production Scheduling in a Job Shop Environment with consideration of Transportation Time and Shortest Processing Time Dispatching Criterion”, International Journal of Advanced Engineering Research and Applications, (ISSN (online): 2454-2377), Vol. 1, Issue 1, pp 41-49,  May 2015. (No of citations 00)
  33. R.M.Belokar, Harish Kumar Banga, Jagbir Singh, Pratik Belokar, “Improvement of Quality through Six Sigma: A Case Study”, International Journal of Engineering, Business and Enterprise Applications (ISSN (Online): 2279-0039), Vol 8, Issue 2, March-May 2014, pp. 127-131 (Number of citations 00)
  34. Kumar, P., Kumar, A., & Singh, B. “Optimization of process parameters in surface grinding using response surface methodology”, International Journal of Research in Mechanical Engineering & Technology (ISSN 2249-5762). Vol. 3, Issue 2, pp 245-252, May – Oct 2013. (Number of citations 02)
  35. Ajit Khatter, Pawan Kumar, Manish Kumar, “Optimization of Process Parameter in TIG Welding Using Taguchi of Stainless Steel-304”, International Journal of Research in Mechanical Engineering & Technolog, Vol. 4, Issue 1, pp 31-36, Nov 2013 – April 2014 (Number of citations 00)
  36. Pawan Kumar, Manish Jangra, Bhupender Singh, “Comparison for Al2 O3 and SiC Wheel on CNC Surface Grinding Machine Using Response Surface Methodology of EN24 Steel”, International Journal of Research in Mechanical Engineering & Technology (ISSN: 2249-5762), Vol. 4, Issue 1, pp 53-62, Nov 2013 – April 2014. (Number of citations 00)
  37. Bhupender Singh, Pawan Kumar, Goutam Arora, Anand Kumar, “Analysis of Machining Parameters for Dimensional Accuracy in EDM using Taguchi’s Doe”, International Journal of Engineering Research & Technology (IJERT) (ISSN: 2278-0181), Vol. 3 Issue 6, pp 113-117, June – 2014. (Number of citations 00)
  38. Pardeep Kumar,Pawan Kumar,Rambhool,Virender Upneja, “An efficient Genetic Algorithm approach for minimising the Makespan of Job Scheduling problems”, International Journal of Science, Engineering & Technology Research (IJSETR) (ISSN: 2278-7798), Vol. 5 Issue 5,May – 2016. (Number of citations 00)
  39. Gourve, Ravi, Neeraj Kumar,”Design of smart structure with controllers for Active Vibration Control”, International Journal of Enhanced Research in Science, Technology and Engineering(IJERSTE)(ISSN:2319-7463),Vol.5 Issue 6,June-2016(Number of citations 01)
  40. Virender Upneja,”Linear Static and Normal mode Analysis of 16 ton truck Capacity of multi leaf spring under the dynamic load condition using FEA”. International Journal of Scintific progress and Research (IISPR) (ISSN: 2349-4689), Vol.36 Issue 2,june – 2017. (Number of citations 00)
  41. Sharma A, Sharma C.”Design and fabrication of an automatic dual axis solar traker by using LDR sensors to load” Int J Eng Science Technology(IJEST) Vol.9 Issue 2, 2017 page no.39-45 (Number of citations 00)
  42. Pardeep Sharma1, Shashi Prakash Dwivedi2, Shubham Verma3 and Vishal Dabra4, ”A Study on Mechanical Behavior of AA2024/SiC Reinforced Composites” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019); ISBN: 978-93-88237-77-2
  43. Mohit Sharma and Pardeep Sharma, “Influence of Submerged Arc Welding on the Impact Strength of High Strength Low Alloy Steel (HSLA)” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019); ISBN: 978-93-88237-77-2
  44. Vikas Nandal and Pardeep Sharma, ”Investigating the Process Parameters of WEDM for Optimization on Die Steel EN-31 using Taguchi-GRA Technique” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ); ISBN: 978-93-88237-77-2
  45. Yatan Nagpal, Pardeep Sharma and Vishal Dabra, “To Enhance Wear Resistance of Cast Iron using Thermal Spray Coating Techniques” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ); ISBN: 978-93-88237-77-2
  46. Yatan Nagpal, Pardeep Sharma and Vishal Dabra, “To Analyze Microstructural Characterization of HVOF Spray Coated SS316L using Ni80Cr and Cr3C2-NiCr Alloy” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ); ISBN: 978-93-88237-77-2
  47. Sunil Kadiyan andB.S. Dehiya, “Importance of Mathematical Modeling (Response Surface Methodology) in Equal Channel Angular Pressing” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  48. Virender Upneja, Sanjeev Sharma and Gautam Arora, “Analysis of Factors and Responses Affecting in High Pressure Die Casting of A356 Aluminium Alloy” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  49. Hargovind Soni, Neeraj Sharma and Pardeep Sharma, “Tribological Behavior of AA2014 Reinforced with Al2O3Particulates” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  50. Neeraj Ahuja, Neeraj Sharma, Pardeep Sharma and Rohit Sharma, “Mechanical Behavior of AA2014 Reinforced with TiC Particles” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  51. Neeraj Sharma, Pardeep Sharma, Vishal Dabra and Rohit Sharma, “Mechanical Behavior of AA6082 Reinforced with MSA Particulates” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  52. Rajesh Khanna, Neeraj Sharma, Pardeep Sharma and Rohit Sharma, “Mechanical Description of AA2014 Reinforced with Al2O3 Particulates” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  53. Jaspreet Hira, Rohit Sharma, Vikas Kumar and Pardeep Sharma, “Friction Stir Welding of Fabricated Hybrid Mg-MMC on Vertical Milling Machine though High Carbon High Chromium Steel Tool” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  54. Pardeep Sharma, Dinesh Khanduja, Puran Chandra Tewari, and Vishal Dabra, “Tribological Aspects of AA6351/Self Lubricating Reinforced Composites” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  55. Pardeep Sharma, Vishal Dabra, Rajinder Kumar and Neeraj Sharma, “A Review: Mechanical and Tribological Properties of Hybrid Composites” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  56. Pardeep Sharma, Vishal Dabra, Rajinder Kumar and Neeraj Sharma, “. A Review: Friction Stir Welding” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  57. Deepak Gupta, Shabir Ahmed,Rohit Sharma and Pardeep Sharma, “Tribological Characterization of Inconel 718 under Varying Load Conditions” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  58. Gaurav Goyal, Neeraj Kumar and Gautam Arora, “Temperature Modeling of Friction Welding on Aluminium & Stainless Steel-304” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  59. Deepak Gupta, Sabzar Ahmed, Rohit Sharma and Pardeep Sharma, “Micro-Hardness Evaluation of Iron based Self-Lubricating Composites” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  60. Bhupender Singh, Pardeep Sharma and Gautam Arora, “Influence of (SiC+Al2O3) Hybrid Reinforcement on the Properties of AA6061” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  61. Pardeep Sharma and Krishan Kant Sharma, ”Effects of Properties (Chemical Analysis and Mechanical Testing) on Weld Beads when Recycled Slag Uses as Flux Consumption in Submerged Arc Welding” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  62. Abhinav Kumar, Vishal Ahlawat, Mukesh Kumar Mann and Pardeep Sharma, ”Behaviour of Walnut Shell Powderfilled Polyester Composites under Tensile and Impact Loading” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  63. Pardeep Sharma and Krishan Kant Sharma, “To Determine Recycle Slag Consumption by Incorporate Box-Behnken Design Method in Submerged Arc Welding” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  64. Kamal Kataria, Gaurav Arora, Kanwarjeet Singh and Swati Varshney, ”Design and Analysis of Progressive Tool for L-Shape Bracket” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  65. Pardeep Ranga, Vasily Klimenov and Pardeep Sharma, “Study of Biomaterials for Various Industrial Applications: Titanium and its Alloys” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  66. Dipesh Popli, Parveen Sharma and Pardeep Sharma, “Evaluation of High Pressure Titanium Spherical Pressure Vessel Using FEM” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  67. Deepak Gupta,Aadil Bashir Rather, Rohit Sharma and Pardeep Sharma, ”Effect of Temperature on the Tribological Behaviour of Haynes 25 Cobalt based Superalloy under Dry Sliding Condition” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  68. Gyander Ghangas,Abhisak Sharma, Pardeep Kumar and Sunil Dhul, ”Effect of Tool Rotational Speed on Mechanical Properties Dissimilar Friction Stir Welded Joints Al-Cu” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  69. Dinesh Kumar, Lalit Thakur, Neeraj Kamboj and Pardeep Sharma, “Processing, UTS and Micro Structure of Aluminium 6063 Metal Matrix Composites Synthesized by Melt Stir Casting” ; ISBN: 978-93-88237-77-2National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019)
  70. Pushkar Saha, Subhanshu Namdeo, Shubham Verma and Pardeep Sharma, “Friction Stir Welding of Nylon–6” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  71. Mukesh Kumar, Gulshan Chauhan, M. Kannan and Pardeep Sharma, “Erosive Wear Behaviour of Thermal Sprayed Nickel and Aluminium Coatings by using Detonation Gun” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  72. Sunil Dhull, Gyander, Nitish, Abhisak Sharma and Pardeep Kumar, ”Effect of Process Parameters on the Properties of Friction Stir Welded Joints of AA7075” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  73. Amit Raman, “Combined Effect of Just In Time (JIT) and Vendor Managed Inventory (VMI) Elements in Hospital Area” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  74. Goutam Arora,Bhupender Panchal, Virender Upneja and Sudeep Malhotra, ”Productivity Improvement using Work Study Techniques in a Manufacturing Industry” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  75. Nitish Munjal, Yatan Nagpal and Pardeep Sharma, ”A Case Study: Implementation of Kaizen as an Improvement Tool in Manufacturing Company” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  76. Pardeep Kumar, Gyander Ghangas, Abhisak Sharma and Sunil Dhull, ”Minimising the Makespan of Job Shop Scheduling Problem by using Genetic Algorithm (GA)” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  77. Seeone Sharma and Sunil Kadiyan, “Performance Measurement of GSCM in Foundry Industry by using MADM Technique” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  78. Uhinee Banerjee, Rohit Sharma and Pardeep Sharma, “Effect of Thermo-Acoustic Instability Phenomenon in Gas Turbine and Engines” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  79. Pardeep Sharma and Krishan Kant Sharma, ”Effects of Properties (Chemical Analysis and Mechanical Testing) on Weld Beads when Recycled Slag Uses as Flux Consumption in Submerged Arc Welding” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  80. Rajinder Kumar, Vishal Dabra and Pardeep Sharma, “Comparison on Influence of the Holding Time of Stored Products by using Water and Ethylene Glycol” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  81. Vishal Dabra, Pardeep Sharma and Rajinder Kumar, “Performance Analysis of R-12 and R-134a based Refrigeration System for Different Evaporator and Condenser Temperature” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  82. Rahul Garg, “An Experimental Thermal Performance Analysis & Comparison of a Direct Expansion Solar Assisted Heat Pump Water Heater with Unglazed and Single Glazed Collector” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  83. Naveen Kumar, “A Review on Potential for Water Extraction from Atmospheric Air by using Different Technique” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  84. Rajinder Kumar, Vishal Dabra and Pardeep Sharma, “Influence on the Holding Time of Stored Products by using Phase Change Material” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  85. Manoj Kumar and Vishal Dabra,  “Effect of Room Temperature on the Cooling Demand for Room Air Conditioning” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  86. Nitin Panwar and Vishal Dabra, “Influence of Room Humidity on the Cooling Demand for Room Air Conditioning” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  87. Rahul Baweja, Vishal Dabra and Pardeep Sharma, “Evaluate the Demand Cooling Load for Different Working Conditions: Theoretical Approach” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  88. Lalit Kaushisk, Vishal Dabra and Pardeep Sharma, ”Global and Economic Significance of Evacuated Tube Solar Air Collector” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  89. Shubham Rohilla, Vishal Dabra and Pardeep Sharma, ”Effect of Mass Flow Rate on the Performa” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  90. Prashant Rathee, Vishal Dabra and Pardeep Sharma, ”Evaluate the Cooling Demand for Storage of Different Food Products” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  91. Abhisak Sharma, Pardeep Kumar, Gyander Ghangas and Sunil Dhull, ”Maintaining the Distance between a Moving Obstacle and Robot using Fire Bird V Robot” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  92. Utsav Walia, Rohit Sharma and Pardeep Sharma, ”Review Paper on Vibrations and Problems Associated with Vibration” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  93. Deepak Gumber, ”Arduino Uno Color based Object Sorting Machine” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2
  94. Sidharth Gandhi and Nisha Chugh,  “Application of Robotics in the Field of Industry, Education and Healthcare” National Conference on Emerging Trends in Mechanical Engineering Research (NCETMER-2019) ; ISBN: 978-93-88237-77-2